All stainless steel stations feature heliarc-welded seams and joints that are ground polished to a smooth finish.
- Plumbing and electrical lines are factory installed and require only minimal installation
- All inside corners have large radii for easy cleaning and effective sanitation
- The reverse flow feature instantly relieves suction clogging by providing a reverse pressure of water
- Hot/cold water fixture features a gooseneck faucet and wrist-blade handles
Large, single compartment sinks feature a heavy-duty ¹/₂ hp commercial waste disposal. Sinks are 86.4 cm (34") wide and feature a deluxe aspirator and vacuum beaker with reverse flow for additional waste removal. A locking mechanism with a slide latch secures carts to the sink; mechanism can be accessed from either side of the carrier. Stations feature a 111.8 cm (44") wide dissecting area next to the sink and a 30.5 cm (12") deep specimen shelf on top. The dissecting area rinse assembly and the spray hose assembly feature cold water control valves. Spray hose assembly has a nozzle and 3 m (10') of flexible hose. Stations are equipped with two waterproof GFCI outlets and a waterproof switch for the waste disposal. A large instrument drawer is located below the dissecting area on the right and left sink models; center sink model features two dissecting areas and two instrument drawers.
Note: Specified dimensions reflect total height when unit is installed with countertop area 86.4 cm (34") above the floor.
All inside corners have large radii for easy cleaning and effective sanitation. Large, single compartment sinks feature a heavy-duty 1/2hp commercial waste disposal. Sinks are 86.4cm (34") wide and feature a deluxe aspirator and vacuum breaker with reverse flow for additional waste removal. The reverse flow feature instantly relieves suction clogging by providing a reverse pressure of water. Hot/cold water fixture features a gooseneck faucet and wrist-blade handles. A locking mechanism with a slide latch secures carts to the sink; mechanism can be accessed from either side of the carrier. Stations feature a 111.8cm (44") wide dissecting area next to the sink and a 30.5cm (12") deep specimen shelf on top. The dissecting area rinse assembly and the spray hose assembly feature cold water control valves. Spray hose assembly has a nozzle and 3m (10') of flexible hose. Stations are equipped with two waterproof GFCI outlets and a waterproof switch for the waste disposal. A large instrument drawer is located below the dissecting area on the right and left sink models; center sink model features two dissecting areas and two instrument drawers.
Ordering information: Plumbing fixtures can be located in various positions; please specify requirements when ordering. Optional features such as eyewash assemblies, gas/air valves, and light fixtures are available. Contact your Avantor representative for more information.