You Searched For:
58 results were found
Environmental Test Kits
Description:
This kit tests for Chloride in fresh water samples using the Direct Reading Titrator method.
Catalog Number:
(470018-044)
Description:
These reagents are the replacement reagents for the total chlorine checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
Catalog Number:
(470105-388)
Description:
This chemical test kit that uses the ascorbic acid method to measure phosphate. It is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests.
Catalog Number:
(470308-894)
Description:
The LaMotte ColorQ meter is a simple way to test low and high concentrations of chlorine.
Description:
The ammonia test kits employing the well-established Nessler reagent to determine ammonia concentrations are applicable to drinking water, clean surface water, and good-quality nitrified wastewater effluent.
![]()
Catalog Number:
(470347-442)
Description:
Easy way to test water for pH within range 6.8 to 8.2.
Catalog Number:
(470006-740)
Description:
This chemical test kit measures carbon dioxide by titration with sodium hydroxide. It is supplied complete with all of the reagents and equipment necessary to perform approximately 100 tests.
Catalog Number:
(470105-384)
Description:
This chemical test kit measures chloride by titration with mercuric nitrate. This test kit supplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.
Description:
The test kits for chlorine in water utilize a self-filling ampoule technology that reduces the user’s exposure to chemicals.
![]()
Catalog Number:
(470041-168)
Description:
This chemical test kit that uses the DPD method to measure total chlorine. The test kit is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests.
Catalog Number:
(470003-780)
Description:
This chemical test kit for the determination of six parameters commonly monitored for aquaculture testing: alkalinity, carbon dioxide, hardness, dissolved oxygen, pH, and salinity. This kit is equipped with all the necessary reagents and equipment to perform over 100 tests for each parameter. pH is obtained with Hanna's pH tester, which guarantees greater accuracy and a longer life than traditional litmus paper.
Catalog Number:
(470350-702)
Description:
This is a complete set of all the solutions required for routine pH measurement.
Description:
This kit test for salinity using the Direct Reading Titrator method.
Catalog Number:
(470349-848)
Description:
This chemical test kit will determine the commonly monitored parameters in soil testing.
Catalog Number:
(470350-698)
Description:
High quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements.
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
![]()
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the
![]()
This product is marked as restricted and can only be purchased by approved Shipping Accounts. To apply for a shipping account number, click here. If you need further assistance, call Customer Service at 800-962-2660 or email [email protected].
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
Limited quantities of this product are available. To check availability or place an order, call Customer Service at 800-962-2660 or email [email protected].
|
|||||||||